IMP - DAVRIAN - GINETTA - CLAN

PARTS & SERVICES PRICE LIST
 

|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|
 

CAMSHAFTS
 
Lift Approx Timing Power band
Std Mk 1-2 .247" Road 6-46-46-6

30.00
Sunbeam B1 .250" Road 27-61-55-9 30.00
GE4 .290" Trials-Road -------------- 2-6000 P.O.A
Imp Sport .310" Road 23-53-61-15 2-6500 P.O.A
BP270 * .300" Mild Road 28-66-66-28 2-6500 65.00
1RY ** .331" Fast Road 30-60-68-22 22-7000 P.O.A
BP285 ** .340" F/Road-Comp 33-63-71-25 25-7000 65.00
R17 .360" F/Road-Comp 29-59-59-29 3-7200 150.00
R20 .360" F/Road-Comp 30-70-70-30 32-7800 150.00
BP300 .350" F/Road-Comp 41-73-73-41 32-7800 180.00
R21 .360" Comp_Race 39-69-69-39 35-8200 180.00
GE1 .360" Comp_Race 35-75-55-35 38-8200 P.O.A
Frazer B .360" Comp_Race 32-72-72-32 38-8200 180.00
R22 .360" Comp_Race 35-75-75-35 4-8200 160.00
BP320 .350" Race 57-83-87-53 45-8200 180.00
GE3 .385" Race 40-80-80-40 52-9000+ P.O.A
BP330 .360" Race 57-83-85-59 52-9000+ 180.00
R23 .360" Race 50-90-90-50 55-9200+ 165.00
 
* Exchange/Reprofiled from standard. ** Exchange/Reprofiled from Sport. Non-exchange surcharge: Std 10.00/Sport: 20.00. All other cams listed are New Machined on to blanks. Some of the above may be available as reserviceable second hand please inquire.

The power bands are approximations due to the many variables i.e. Capacity, Valve sizes-head mods, manifolds etc, where as the timing figures are from information given and stated by suppliers, but even these may be conflicting due to the varying initial lift set by the cam grinder to measure the claimed timing figure.
 

 
CAM CARRIERS + FOLLOWERS

O/E Carrier for std cam

34.00
O/E Carrier for sport cam

46.00
O/E Carrier for .360" lift cams

75.00
Special Race carrier machined from alloy block

 P.O.A.
 
Modifications:
Modify std/sport carrier for .360" cams

20.00
Machining carrier for oversize followers

36.00
Drilling additional tappet guide oil feed holes

20.00
Std carrier end bolt modification. Drill/counter bore carrier bearing housings + supply modified cap head end bolts, including drill + tap head (secures the carrier through into the head adding much needed rigidity when using race cams

30.00
Camshaft bearing shell set 20.20
Cam follower Imp or (Sunbeam B1 .020" thicker than Imp) P.O.A
Light weight Steel followers (diameter std + oversize) 102.00
Shims (tappet) .070" - .110" 2.50
    

REG PATTEN
116 Courtney Crescent, Carshalton, Surrey SM5 4NB
(Collection/callers by prior arrangement only)

Phone/Fax: 020 8661 0183

Email: enquiries@hillmanimpspecialists.com
 

R.S. Patten • 116 Courtney Crescent • Carshalton • Surrey • SM5 4NB
Email: enquiries@hillmanimpspecialists.com